SFStateStudent
Apr 18, 10:59 AM
Might hold off on iPhone 5 if iPhone 6 is bringing all these things to the table...:eek:
MacTech68
May 31, 01:22 AM
Hi. I need some help with a malfunctioning color stylewriter 2500. Whenever I try to make a test page, it just passes through the printer without printing anything. I've already replaced the ink cartridges. Any ideas?
Has this problem just occurred or did you dis-assemble the beast and this problem began after re-assembly?
There are cams that need to be aligned together on the rear paper feed tray for things to happen correctly.
You might also want to pay attention to the paper feed sensor which might be telling the machine that paper is "permanently" loaded. The logic here is that the printer is trying to eject the paper it "sees" when turned on before loading a new sheet to perform a self test, but because the paper feed sensor is jammed it's as if the paper never leaves the printer.
Does that make sense?
EDIT: I should ask, does it sound like it's printing? IE, does the printe head carriage move left to right or does it just feed the paper only?
________
Jaguar XJ13 picture (http://www.ford-wiki.com/wiki/Jaguar_XJ13)
Has this problem just occurred or did you dis-assemble the beast and this problem began after re-assembly?
There are cams that need to be aligned together on the rear paper feed tray for things to happen correctly.
You might also want to pay attention to the paper feed sensor which might be telling the machine that paper is "permanently" loaded. The logic here is that the printer is trying to eject the paper it "sees" when turned on before loading a new sheet to perform a self test, but because the paper feed sensor is jammed it's as if the paper never leaves the printer.
Does that make sense?
EDIT: I should ask, does it sound like it's printing? IE, does the printe head carriage move left to right or does it just feed the paper only?
________
Jaguar XJ13 picture (http://www.ford-wiki.com/wiki/Jaguar_XJ13)
dalvin200
Sep 13, 05:49 AM
If you've see the keynote stream, then you'll of come across the part where Steve asked some of his employees (marketing, engineer etc..) to stand up and receive a round of applause.
I thought this was quite a nice gesture and it's the first time I have seen this from them.
Good things!! :claps:
I thought this was quite a nice gesture and it's the first time I have seen this from them.
Good things!! :claps:
bdj21ya
Oct 26, 09:00 AM
Those aren't buttons. those are circles showing you where the touch sensitivity is.
I think people are misinterpreting the diagram.
A video iPod with touch-bezel will still look like this:
http://guides.macrumors.com/images/thumb/0/04/Ipodvideo.jpg/120px-Ipodvideo.jpg
arn
Thank you for pointing this out. Saves me having to do it. The interface would look very sleek. Of course, with some of the functions, a lot of less saavy users would definitely need to read that instruction manual, or be initiated by some other user.
I think people are misinterpreting the diagram.
A video iPod with touch-bezel will still look like this:
http://guides.macrumors.com/images/thumb/0/04/Ipodvideo.jpg/120px-Ipodvideo.jpg
arn
Thank you for pointing this out. Saves me having to do it. The interface would look very sleek. Of course, with some of the functions, a lot of less saavy users would definitely need to read that instruction manual, or be initiated by some other user.
wingnut8
Apr 6, 04:18 PM
Do you know what a tetherball is?
What's the difference between a tetherball and a ball? A cord\cable\string.
Tethered = when you reboot it has to be connected to your PC
Untethered = when you reboot it doesn't have to be.
You should google the question next time, don't be lazy.
Calm down.
What's the difference between a tetherball and a ball? A cord\cable\string.
Tethered = when you reboot it has to be connected to your PC
Untethered = when you reboot it doesn't have to be.
You should google the question next time, don't be lazy.
Calm down.
mainstreetmark
Nov 11, 11:21 PM
Yeah, I clearly copied the "forum post" template, but that's obviously changeable. It was just a proof of concept, but if random visitors can't write to the 'Talk' page, it's all for naught anyways.
I just thought it might be an invitation for a random net visitor to contribute. That's the main issue facing all wiki's - not enough contributors.
I just thought it might be an invitation for a random net visitor to contribute. That's the main issue facing all wiki's - not enough contributors.
OldSchoolMacGuy
May 2, 03:37 PM
You can use the Migration Assistant and select the Time Machine drive, then select the file types you'd like to move over if you're looking to move things like apps, documents, preferences, etc rather than just specific files. For specific files, there are a couple nice Time Machine browser applications out there that can make going through the backup files easier.
Mac Seller
Apr 8, 09:15 PM
Hello, I am new to the site and am glad to be on board. I am not a computer person just a low end user! I have the original blueberry Mac, keyboard and want to sell it. I had the drive cleared so it is like new. How does one go about selling it?;) MS
ComicStix
Nov 3, 12:19 PM
I am looking for some good headphones because my cheap in ears have broken. Again. I heard skullcandy's are good. I found both of them for 28 dollars and 32 dollars on overstock.com. I plan on listening to rap and hip hop and techno with a little rock. Which one should I get? Opinions?
mpw
Sep 11, 08:09 AM
I was at work ~2pm, at the time my brother was working for the same company and away on business. He called to ask if I was listening to the news as he was now stuck in chaos at Gatwick because of the attacks. I tried to get news form the web but it had ground to a halt and I had to go out and find a radio.
I remember saying to the guys at work that even if they never found the guy who did it (at that time it hadn't been linked to anyone and I'd only ever heard of Bin Laden from a chapter in an autobiography from a BBC reporter who's name escapes me right now) they'd have to go to war with somebody just to vent their anger.
I remember saying to the guys at work that even if they never found the guy who did it (at that time it hadn't been linked to anyone and I'd only ever heard of Bin Laden from a chapter in an autobiography from a BBC reporter who's name escapes me right now) they'd have to go to war with somebody just to vent their anger.
Shake 'n' Bake
Mar 4, 04:36 PM
An interesting tidbit on this: Spiders have only been found on L4 equipped models; none found on V6 powered cars.
Slim02
Mar 14, 08:39 PM
Now that brings back some nice memories ... Walkman, Discman, ... and Sony can make at times really nice designs.
What are you talking about.. Sony still made Walkman and
Discman http://www.sonystyle.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10151&langId=-1&catalogId=10551&categoryId=8198552921644761499&N=4294950923&Name=Walkman%20MP3%20&%20Audio%20Players
What are you talking about.. Sony still made Walkman and
Discman http://www.sonystyle.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10151&langId=-1&catalogId=10551&categoryId=8198552921644761499&N=4294950923&Name=Walkman%20MP3%20&%20Audio%20Players
cecildk9999
Oct 25, 10:02 AM
I dunno; the way these articles make it sound, people had to buy their iPods because they already had large iTunes accounts, and it was the only way to listen to their music. But of course it was the other way around, that the store was the result of the iPod. I suppose it would be nice to have the option to put my purchased iTunes mp3s on a different player (although I don't see myself doing it), but I agree with everyone about the integration and ease of use keeping the iTunes market strong. And unless other mp3 players can be easily synched with your iTunes playlists and music, the whole DRM thing seems pretty moot to me. The iPod is iConic (couldn't help myself :p ); it'll take a lot of great word of mouth and aggressive marketing by other companies to even take a real bite out of Apple.;)
hiddenpremise
Apr 24, 12:44 PM
I know it is jpeg data because the key in the plist is called "jpegphoto". And what I posted is just the beginning. I shortened it b/c that actual data is very long. Thanks!
The X Factor
Apr 1, 07:22 AM
The 4.3.1 exploit of ionics isn't for iPad 2 owners, but it's not an april fools, he gave it to them a few days ago.
Presently, only poisixninja and the chronic team are working on iPad 2 jbs afaik. Comexs exploit was patched in 4.3.1 and it doesn't seem like he's going to release his old 4.3 exploit, although I could be wrong. He was waiting for chpwn to provide an iPad 2 bottom dump but I don't know whats going on with that. His parody account claims he just needs to finish the artwork on the new jb, but im pretty sure that actually is an April fools joke as it's not from his regular account.
As for all others, can't comment on other ppl not in the scene, can't know if they are legit or not unti they release. If anything changes through twitter or anything I'll post here. Late.
This is the first valuable post to those of us that don't follow twitter. So, your understanding is that someone is working on a 4.3.1 jailbreak for the iPad 2? Your response is much appreciated.
Presently, only poisixninja and the chronic team are working on iPad 2 jbs afaik. Comexs exploit was patched in 4.3.1 and it doesn't seem like he's going to release his old 4.3 exploit, although I could be wrong. He was waiting for chpwn to provide an iPad 2 bottom dump but I don't know whats going on with that. His parody account claims he just needs to finish the artwork on the new jb, but im pretty sure that actually is an April fools joke as it's not from his regular account.
As for all others, can't comment on other ppl not in the scene, can't know if they are legit or not unti they release. If anything changes through twitter or anything I'll post here. Late.
This is the first valuable post to those of us that don't follow twitter. So, your understanding is that someone is working on a 4.3.1 jailbreak for the iPad 2? Your response is much appreciated.
Frisco
Sep 13, 03:28 PM
So the article mentions backing up your Library as a new feature included in iTunes 7. I don't really see it anywhere, anyone know what they're talking about?
Obviously I could just copy the library and folder myself (since I keep the library consolidated), but it would be nice to know how to do this directly from iTunes.
See this (http://www.tuaw.com/2006/09/12/how-to-back-up-your-music-using-itunes-7/)
Obviously I could just copy the library and folder myself (since I keep the library consolidated), but it would be nice to know how to do this directly from iTunes.
See this (http://www.tuaw.com/2006/09/12/how-to-back-up-your-music-using-itunes-7/)
Socratic
Apr 24, 08:51 PM
check if they require verification for you to change your email address. If not, it's probably fake.
Eaton Photos
Mar 10, 04:41 PM
OP,
You have received quite a great amount of advice, since I posted earlier in the thread. As Firestarter, so eloquently pointed out, RAID is not Back-up per-say, rather it is a storage solution. I use various RAID configurations, because they work for me. I went with RAID 1 & RAID 1+0 (10) storage setups, because they are what works for me & my work-flow. I shoot way too much, to be using DVD's as a storage solution.
From my experience, I have yet to encounter someone, that has a had a CD/DVD last more than a Decade. IMO, that type of statement is not valid, till we've had DVD-R's for two decades or so, and can prove that they are still readable years later. Lab Testing, doesn't count for crap in real life.
I bought my Mac Pro on eBay, and have yet to encounter any issues with it. It is a 1st Gen (1,1), and has worked flawlessly. After I received it, I added 12GB of Ram, and re-configured the HDD Bays for my needs.
Bay 1: 250GB for OS, Documents, & Apps
Bay 2: 1TB 7200, for Scratch and only Scratch. I have it setup for both CS5 & Final Cut, but that's it. I do not use it for anything else.
Bay 3: 1TB 7200. OSX RAID 1
Bay 4: 1TB 7200. OSX RAID 1
Both 3 & 4, are linked together via OSX, in a RAID 1 Configuration. I use the RAID 1 primarily for active files that I am rendering/ working from (i.e. Images & Videos), however, I also make a clone of the 250GB HDD, that I regularly update, as files are created/ edited.
Though Designer Dale, pointed out that I am a Pro, I also started out learning the ropes through mostly trial & error, of what to buy & what not to buy. That is a rather expensive road however, and forums didn't exist back in the late 90's & early 00's, like they do today. Whether your a Pro, a Hobbyist, or a Beginner, it doesn't really matter when it comes to storage. Storing & backing up Images/ Videos/ Files, is just part of the modern digital age. When I am asked about cameras' to buy, I suggest to anyone, that is looking to invest into the newer DSLR's/ HDSLR's, to also invest in large HDD's to back up the rather large images, that are captured by the newer bodies.
Snberk103, has hit the nail on the head, regarding his most recent post. Mac Pro's are typically a longer term investment. Though I bought a 1st Gen, it is quite sufficient for running CS5 in 64 Bit, and Rendering video in Final Cut.
Here is an example of daily usage on my MP: I typically have 6-10 Apps running at any given time, and though I have PS CS5 maxed out, Ram allotment wise (80% of total Ram), I never max out all 12 gigs. Highest I have ever hit, with both CS5 & FC running @ 100% + FireFox & PhotoMechanic is 9 of 12GB. If I leave FF running for days on end, then it will consume 1-1.5GB of Ram on its own, and I will start getting paging issues on certain sites. Even though the MP is a 1,1, it is expandable to 32GB of Ram. :D
I also have a Spring 2008 24" iMac (2.4 C2D, 4GB Ram, 250GB HDD), and it does well running CS3, FF, & PhotoMechanic. But the iMac is nearly maxed out Ram wise, and doesn't offer the expandability of the Mac Pro. However, since I bought the Mac Pro, the iMac is resigned to light duty, as it just doesn't stack up to the Mac Pro, though the iMac is several years newer.
The suggestion for an LCD to compliment your Mac Pro investment, is quite an important area to look into. I currently use the last generation of the 23" ACD. Color Accuracy is dead on, however, when I start looking for a replacement, I will be looking towards both the NEC PA Series Line-up (http://necdisplay.com/category/desktop-monitors) & also the Dell UltraSharp line-up (http://www.dell.com/content/topics/topic.aspx/global/products/landing/en/ultrasharpmonitor?c=us&l=en&cs=04).
You have received quite a great amount of advice, since I posted earlier in the thread. As Firestarter, so eloquently pointed out, RAID is not Back-up per-say, rather it is a storage solution. I use various RAID configurations, because they work for me. I went with RAID 1 & RAID 1+0 (10) storage setups, because they are what works for me & my work-flow. I shoot way too much, to be using DVD's as a storage solution.
From my experience, I have yet to encounter someone, that has a had a CD/DVD last more than a Decade. IMO, that type of statement is not valid, till we've had DVD-R's for two decades or so, and can prove that they are still readable years later. Lab Testing, doesn't count for crap in real life.
I bought my Mac Pro on eBay, and have yet to encounter any issues with it. It is a 1st Gen (1,1), and has worked flawlessly. After I received it, I added 12GB of Ram, and re-configured the HDD Bays for my needs.
Bay 1: 250GB for OS, Documents, & Apps
Bay 2: 1TB 7200, for Scratch and only Scratch. I have it setup for both CS5 & Final Cut, but that's it. I do not use it for anything else.
Bay 3: 1TB 7200. OSX RAID 1
Bay 4: 1TB 7200. OSX RAID 1
Both 3 & 4, are linked together via OSX, in a RAID 1 Configuration. I use the RAID 1 primarily for active files that I am rendering/ working from (i.e. Images & Videos), however, I also make a clone of the 250GB HDD, that I regularly update, as files are created/ edited.
Though Designer Dale, pointed out that I am a Pro, I also started out learning the ropes through mostly trial & error, of what to buy & what not to buy. That is a rather expensive road however, and forums didn't exist back in the late 90's & early 00's, like they do today. Whether your a Pro, a Hobbyist, or a Beginner, it doesn't really matter when it comes to storage. Storing & backing up Images/ Videos/ Files, is just part of the modern digital age. When I am asked about cameras' to buy, I suggest to anyone, that is looking to invest into the newer DSLR's/ HDSLR's, to also invest in large HDD's to back up the rather large images, that are captured by the newer bodies.
Snberk103, has hit the nail on the head, regarding his most recent post. Mac Pro's are typically a longer term investment. Though I bought a 1st Gen, it is quite sufficient for running CS5 in 64 Bit, and Rendering video in Final Cut.
Here is an example of daily usage on my MP: I typically have 6-10 Apps running at any given time, and though I have PS CS5 maxed out, Ram allotment wise (80% of total Ram), I never max out all 12 gigs. Highest I have ever hit, with both CS5 & FC running @ 100% + FireFox & PhotoMechanic is 9 of 12GB. If I leave FF running for days on end, then it will consume 1-1.5GB of Ram on its own, and I will start getting paging issues on certain sites. Even though the MP is a 1,1, it is expandable to 32GB of Ram. :D
I also have a Spring 2008 24" iMac (2.4 C2D, 4GB Ram, 250GB HDD), and it does well running CS3, FF, & PhotoMechanic. But the iMac is nearly maxed out Ram wise, and doesn't offer the expandability of the Mac Pro. However, since I bought the Mac Pro, the iMac is resigned to light duty, as it just doesn't stack up to the Mac Pro, though the iMac is several years newer.
The suggestion for an LCD to compliment your Mac Pro investment, is quite an important area to look into. I currently use the last generation of the 23" ACD. Color Accuracy is dead on, however, when I start looking for a replacement, I will be looking towards both the NEC PA Series Line-up (http://necdisplay.com/category/desktop-monitors) & also the Dell UltraSharp line-up (http://www.dell.com/content/topics/topic.aspx/global/products/landing/en/ultrasharpmonitor?c=us&l=en&cs=04).
P-Worm
Jul 26, 03:11 PM
I'm not sure if they come with it now, but it is a free download at apple.com/itunes.
P-Worm
P-Worm
themyst
Mar 27, 11:36 AM
Wrong way round - it's userland, therefore WILL be tethered. See explanation here:
http://bit.ly/gN060d
actually, there are untethered userland jailbreaks. Look at the jailbreakme.com exploit from 4.0 / 4.0.1 for the iPhone 4.
http://bit.ly/gN060d
actually, there are untethered userland jailbreaks. Look at the jailbreakme.com exploit from 4.0 / 4.0.1 for the iPhone 4.
anabel
Mar 30, 10:43 PM
Hi everyone,
I have to install windows only for the use of AutoCAD 2012 software..
I have to install windows only for the use of AutoCAD 2012 software..
Jigga
Apr 15, 08:45 AM
4.3.2 jailbreak might be ready soon :)
http://www.redmondpie.com/jailbreak-ios-4.3.2-untethered-confirmed/
Seems to be for All devices :)
"All" does not include the iPad 2
http://www.redmondpie.com/jailbreak-ios-4.3.2-untethered-confirmed/
Seems to be for All devices :)
"All" does not include the iPad 2
robc21
Apr 20, 09:41 AM
Same thing here on the iPad, but the iPhone 4 works just fine, both have where updated yesterday. Even tried deleting the app on the iPad and re downloading it but the same results.
redeye be
Feb 15, 03:34 PM
Don't have a product recomendation ready but looks like u will deffinetly need a document feeder. I have a flatbed scanner without feeder and wouldn't even dare to dream about scanning 100+ pages on the same day :eek:
As for the usb, i don't think u should be concerned. A 2.0 scanner will work with your 1.0 PB ( :confused: - mine does ;) )
You will however need good OCR software (could be in the package, could be the package sucks)
Cheers and good luck searching.
As for the usb, i don't think u should be concerned. A 2.0 scanner will work with your 1.0 PB ( :confused: - mine does ;) )
You will however need good OCR software (could be in the package, could be the package sucks)
Cheers and good luck searching.
